Panels
Packhorse case panels are made from tough aluminium lightweight honeycomb, polypropylene or plywood faced with a multitude of tough protective finishes, even carbon fibre and most technical resins (See list below).
Aluminium honeycomb (10 and 13mm thickness)
Faced both sides with a double layer cross weave of glass fibre which is impregnated with a heat activated resin. This panel is then faced with one of the laminates below...
Plywood (7, 10 and 13mm thickness)
Faced with:
Laminates and finishes
- Fibreglass heavy or light grain resin bonded for more durability
- ABS (Acrylonitrile butadiene styrene)
- Diamond board (Vameldeck, Vamelstrong or Vamelglass)
- Aluminium stucco
- HPL (High pressure laminate)
- PVC (Poly vinyl chloride)
- Carpet, paint or a wood stain
*All our birch-faced plywood is from managed sustainable sources.
Polypropylene Sandwich Panel (7 and 10mm thickness)
Good inexpensive weight saving panel in a range of attractive colours.